(GI-21/3) Risk Prevention, Environmental Engineering and Technologies for Sustainable Development

Coordinator of the Group:

Members of the Research Group:

  • Dr. Anselmo Cesar Soto Pérez (Universidad Alfonso X El Sabio)
  • Dr. Carlos Mayo del Río (Instituto Madrileño de Formación)
  • Dr. Rafael Ruíz Calatrava (Universidad de Córdoba).
  • Jaime Sánchez Gallego (Universidad Politécnica de Madrid)
  • Albert Xavier Rojas Royo
  • Antonio Díaz Martín
  • Jorge Bañeras Gómez – Tejedor

Keywords:

Life Cycle Assessment. Modeling. Ecodesign. Renewable. Energy efficiency. Protection. Emerging Risks.

Brief description of the Group and Objectives:

The Research Group is integrated of Philosophie doctors (PhD), professors and doctoral students with training in different areas of engineering. The objectives set go beyond the production of basic research. The Group has the vocation to create innovation and carry out applied research and technological and industrial developments at the service of Sustainable Development and the creation of safer and healthier environments.

Lines of research:

  • Life cycle assessment. Development of clean technologies.
  • Development of new materials for power generation.
  • New technologies for the efficient renewable energy generation and storage
  • Development of predictive models for sick leave prevention.
  • Identification of emerging risks and air quality technology.

Posts:

  • Modelización matemática de predicción de costes de siniestralidad laboral. análisis por sectores productivos. (Ministerio de Trabajo, Migraciones y Seguridad Social 2018, Fundación Estatal para la Prevención de Riesgos Laborales, Editorial C.E.O.E. ISBN: 978-84-09-04324-8, Septiembre 2018)
  • Análisis de la evolución y situación actual de la formación en Prevención de Riesgos Laborales. Una propuesta de mejora. (Ministerio de Trabajo, Migraciones y Seguridad Social 2018, Fundación Estatal para la Prevención de Riesgos Laborales, Editorial C.E.O.E. ISBN: 978-84-09-05336-0, Noviembre 2018)
  • Prevención de Riesgos Laborales frente a la exposición de nanopartículas en el sector de la construcción. (Fundación Laboral de la Construcción). Depósito Legal M- 10177-2019, 2019) http://www.lineaprevencion.com/uploads/proyecto/applications/ARCH5cc033c60f8c3.pdf
  • Life Cycle Assessment of heat transfer fluids in parabolic trough concentrating solar power technology. Solar Energy Materials and Solar Cells 171 (2017) 91–97
  • Comparative environmental assessment of two materials suited to central tower CSP technology. Solar Energy Vol. 162 pag 178 – 186 journal homepage: www.elsevier.com/locate/solener
  • Sustainability assessment of electricity cogeneration from sugarcane bagasse in Jamaica. Journal of Cleaner Pruduction 200 (2018) 390-401. www.elsevier.com/locate/jclepro
  • Corrosion resistance of protective coatings against molten nitrate salts for thermal energy storage and their environmental impact in CSP technology. Solar Energy ISSN 0038-092X. https://doi.org/10.1016/j.solener.2018.10.083
  • Infuence of elemental composition in environmental impacts of steel. Journal of Iron and Steel Research International ISSN 1006-706X DOI 10.1007/s42243-019-00339-2
    https://doi.org/10.1007/s42243-019-00339-2
  • Environmental Impact Assessment of crystalline solar photovoltaic panels" End-of-Life phase: Open and Closed-Loop Material Flow scenarios. Sustainable Production and Consumption 23 (2020) 157–173 journal homepage: www.elsevier.com/locate/spc
    https://doi.org/10.1016/j.spc.2020.05.008
  • Jamaican bioethanol: an environmental and economic life cycle assessment. Clean Technologies and Environmental Policy https://doi.org/10.1007/s10098-021-02037-8

Patents

  • Sistema de bombeo hidráulico a alta presión sin consumo energético externo.
    Número de publicación: 2 633 840. Número de solicitud: 201600151
  • Sistema hidráulico de recirculación de aguas profundas sin aporte energético externo.
    Número de publicación: ES1215064. Número de solicitud: U201830721 (modelo de utilidad)
  • Compuesto polimérico y procedimiento de obtención del mismo.
    Número de publicación: 2 632 225. Número de solicitud: 201600183

Research projects:

Project name: "Generation and Study of Coatings for the Protection of Materials in Aggressive Atmospheres: Sustainability and Energy Efficiency".
IP: Francisco Javier Pérez Trujillo

Project name: I + D + I Projects - State Program for Research, Development and Innovation Oriented to the Challenges of Society.
Endowment: 110,000
Start-end date: 01.01.2015 - 31.12.2018

R&D contracts:

Project's name: "Desarrollo y divulgación de estudios sobre análisis, investigación, promoción, apoyo, vigilancia y control de la Prevención de Riesgos Laborales":
IP: Ricardo Díaz Martín:
Number of researchers: 5
Spanish Confederation of Business Organizations.
Endowment: 24.000 €:
Start-end date:March 2018 – December 2018

Project's name: "Estudio de los riesgos de los nanomateriales en los procesos de corte en la construcción. (2018 – 2019):
IP: Ricardo Díaz Martín:
Number of researchers:2
Fundación Laboral de la Construcción (FLC):
Endowment:11.000 €:
Start-end date: January 2019-September 2019

Project's name: "Estudio y soporte en sensórica ambiental y sanitaria":
IP: Ricardo Díaz Martín:
Number of researchers: 5
AUTOMATED DEVICES. S.L.:
Endowment: 25.000 €
Start-end date: September 2020 – September 2021